EN
News
Introduction to the storage environment of relay HKE
Categories:
relay HKE
Source:
Release time:
2022-06-07
In a high temperature and high humidity environment, when the ambient temperature changes rapidly, condensation may form inside the relay HKE. In particular, dew condensation is likely to occur when transporting by sea, so please pay attention to the transport environment. Dew condensation is a phenomenon in which water vapor condenses into water droplets when the temperature changes from high temperature to low temperature or from low temperature to high temperature and high humidity in a high temperature and high humidity environment. Condensation can cause insulation degradation, coil corrosion and disconnection, rust, etc.
Low-temperature freezing: In dew condensation and high-humidity environments, in the state where moisture adheres to the relay HKE, the water freezes when the temperature drops below the freezing point. Icing can cause sticking of moving parts, delayed action, or ice between the contacts, causing the contacts to fail.
In a low temperature and low humidity environment, plastic may become brittle.
When stored in high temperature, high humidity and environment containing organic gas and sulfide gas for a long time, sulfide film and oxide film will be formed on the contact surface, resulting in unstable contact and contact failure. Please pay attention to the packaging form and minimize the influence of humidity, organic gas, sulfide gas, etc.
The relay HKE should be stored and installed in a clean environment. Please use a dust cover or plastic-encapsulated relay HKE in an environment with dust pollution.
Previous Page
Related News
8613632534755
Address: 12F, Building C, Tongjian Building, Nanyuan Street, Futian District, Shenzhen
